Canadian Test Data

ULc-S101 on Oriented Strand Board (OSB)  “Fire Resistance Test”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     12.10.2011


This test is designed to run to 15 minutes but we ran it to just over 25 minutes delivering results better than any the laboratory technicians had ever seen from any intumescent product.

Click here for full test

 

ULc-S101/UL-263  “Full Scale on Structural Steel – 3 hours”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     01.20.2012


This was a full scale test using two sizes of beams and decking with 4” of concrete. The concrete was placed in segmented panels with a 1” gap to avoid the supportive effect that would happen with one contiguous pour. It was then loaded with an additional 1038 lbs/lf using hydraulic jacks. The test went to 174 minutes restrained for the lighter beams and decking and 176 minutes for the heavier section.

Click here for full test

 

ULc-S102/UL-723  “Fire Resistance Test”

Location:       Intertek Laboratories, Coquitlam, BC CANADA

Test Date:     12.21.2011


We tested our thinnest specimen yet (3/8”) of OSB with our thinnest coat ever (8 mils dft) and still got Flame Spread and Smoke Production stats of 5×40.

Click here for full test

 

Original Formula Product Data Sheet

 

High Solids Product Data Sheet

 

Material Safety Data Sheet (MSDS)

 

 

View Test Data by Substrate

 

Request Information Kit